The BendPak XPR-9 two post car lift offers a durable, safe, and reliable solution for lifting virtually everything from small to mid-size cars to full-size trucks (within reason). BendPak designed it to provide a solution for Pros and hobbyists alike, and the XPR-9 offers an instantaneous lifting action and rugged, open-top design. With 9,000 lbs maximum lifting capacity, the BendPak XPR-9 two post car lift is a really flexible solution for your shop. It comes with equipped with dual-snychro equalization system and user-friendly controls.
The BendPak XPR-9 has industrial-grade hydraulic cylinders in one-piece, pilot fitted, machined steel pistons which are wrapped with pressure loaded U-cup piston seals, back-ups, and wear bands that virtually eliminate any fluid bypass.
[adsenseyu1]
BendPak XPR-9 Two Post Car Lift Features
This BendPak XPR-9 car lift comes equipped with low-profile dropped-end frame contact pads, free truck and van adapters, triple-telescoping front arms, and two-stage rear arms. It also has lowered arm tube supports, automatic arm restraints, taller lift carriages, maintenance-free load bearings, single-piece columns, wide or narrow selection, a single-point safety release, and a durable powder-coat finish. A detailed installation and maintenance instructions is also included.
BendPak XPR-9 Two Post Car Lift Key Features
- 9,000-lb lifting capacity
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Shorter column for low-ceiling installations
- Adjust able wide or narrow drive-thru configurations
- Extended rise gives you over 6-feet of under clearance
- Single-piece columns
- Single-point safety release
- Drop-end arms provide a lower pad height
- Chain lifting system combined with dual hydraulic cylinders
- Electric / hydraulic power system
- Large 20 in. x 19 in. steel base plates
- Self-lubricating dura-glide polyethylene bearing system
- Safety locks in each column spaced every 3-inches
- Automatic arm restraints
- Heavy-duty dual 3/8 in. equalizer cables with oversize cable sheaves
- Truck and van adapters standard
BendPak XPR-9 Two Post Car Lift Specifications
- Lifting capacity: 9,000 lbs. / 4,082 kg; Max capacity / front axle: 4,500 lbs. / 2,041 kg
- Lifting capacity: 9,000 lbs. / 4,082 kg; Max capacity / rear axle: 4,500 lbs. / 2,041 kg
- Overall height: 113 in. / 2,870 mm
- Width overall (NARROW CONFIG): 132 in. / 3,353 mm
- Width overall (WIDE CONFIG): 145 in. / 3,683 mm
- Width outside of columns (NARROW): 126-3/4 in. / 3,225 mm
- Width outside of columns (WIDE): 139-3/5 in. / 3,555 mm
- Floor pan height: 1-1/4 in. / 32 mm
- Inside columns (NARROW): 105 in. / 3,208 mm
- Inside columns (WIDE): 118 in. / 3,538 mm
- Front arm min reach: 27-1/2 in. / 698 mm
- Front arm max reach: 51-1/2 in. / 1,308 mm
- Rear arm min reach: 34 in. / 864 mm
- Rear arm max reach: 54-1/2 in. / 1,384 mm
- Min pad height: 4 in. / 102 mm
- Rise: 72 in. / 1,829 mm
- Lift height max (pad only): 76 in. / 1,930 mm
- Lift height max (6 in. adapter): 82 in. / 2,083 mm
- Drive-thru clearance (NARROW): 93 in. / 2,362 mm
- Drive-thru clearance (WIDE): 106 in. / 2,692 mm
- Motor: 220 VAC / 60 Hz / 1 Ph
- Time to full rise: 45 sec
- Max load per arm: 2,250 lbs. / 1,021 kg
- Warranty: 5 years on the lift structure; 2 years on hydraulic cylinders and power unit; 1 year operating components; 1 year on site or factory, 1 year on ground-freight related
[adsenseyu2]
For more information about the BendPak XPR-9 two post car lift, click here.
Leave a Reply