SKIL 20V Brushless Impact Driver – PWRCore 20 Video Review

SKIL 20V Brushless Impact Driver FI

Take a look at the New SKIL power tools…better yet, use the SKIL 20V Brushless Impact Driver and your mind may be blown. If you have any remembrance of the SKIL tools of old, there’s no comparison. SKIL has launched a whole new lineup of tools, under new ownership, to exceed DIY expectations. In fact, this impact easily crosses over into the Pro category, especially with power.

See the video to have a look at the abuse we put this SKIL Impact Driver through.

SKIL 20V Brushless Impact Driver LS Engine

SKIL 20V Brushless Impact Driver Features

At the heart of this heavy hitter is the Brushless motor and the 20-volt lithium battery. Listed at 1800 in-lbs (150 ft-lbs) of torque, we tested the SKIL 20V brushless impact driver breaking free nuts that were torqued to 250ft-lbs. The 20-volt battery also includes a USB port for charging any of your phones or smart devices. You get three power modes: High, Low, and Control Mode. Control Modes starts slow, then when it senses that a fastener is started, it kicks into High speed. We like using the variable speed trigger to feather the RPMs and power where we want it.

SKIL PWRCore 20 Impact

2 Bars Left After Engine Teardown

With the Brushless kit, you also get the upgraded PWR Jump charger which will charge the 2.0Ah battery to 25% (from 0%) in just 5 minutes. This charger will also charge the 2.0 battery from 0 to 100% in just 45 minutes. An LED light at the base shines on the fastening area and a knurled collect allows for easy grippage during bit changes. Rubber overmoulding and comfortable ergonomics makes handling the SKIL 20V brushless impact driver a breeze.

More Great Video Reviews: Husky 10-pc This Wall Impact Sockets

Husky 10-piece Thin Wall Impact Sockets Video Review

Final Thoughts

This is really an easy conclusion. The SKIL 20V brushless impact driver is only $149 for the kit, has the power of a Pro impact driver, and SKIL includes a 5-year warranty. On top of that, you can charge your phone from the battery. If you’re in the market for a new DIY impact driver, or you’re a new Pro in the trades, do yourself a favor and take a close look at this SKIL PWRCore 20 impact driver.

SKIL PWRCore 20 Impact Driver Specifications

  • Chuck type: Hex collet
  • LED light: Yes, with pre-light and after-glow
  • Max impact rate: 0-2400/3400
  • Max torque hard joint: 1800 in. lbs
  • Net weight excl. battery: 2.47 lbs (1.12 kg)
  • No-load speed: 0-1700/2700
  • Trigger Type: Variable Speed
  • Voltage: 20V
  • Amazon Price: $149


Leave a Reply

Your email address will not be published. Required fields are marked *

2 × three =

Would love your thoughts, please comment.x