JET Abrasive Pipe Notcher Feature Grinders

JET Abrasive Pipe Notcher – Dual Station


Safety ShieldPipe and tubing notchers come in a variety of platforms. A quick search will return pneumatic operated, hydraulic press and dies, jigs with drills and hole saws, and the abrasive type. None that we have seen yet have the flexibility and feature set of the new JET Abrasive Pipe Notcher. JET states this to be a dual station machine, however there are three ways to access and do different work.

The dual station JET abrasive pipe notcher has the basic idea of a large belt sander. Maybe more aptly a large belt sander, on steroids, and turned horizontal. This has a large wheel on one end the drives the belt, and the opposite end allows different size rollers. These rollers can be changed, based on the work that is being done.

SUPPORT OUR ADVERTISERS

Dual Station JET Abrasive Pipe Notcher Features

Pipe Notching

Pipe Notching

Operators of the JET notcher can access this from either end of the horizontal belt sander and the middle. For notching pipe, the user works from the exchangeable roller end (smaller roller end) of the notcher. Included roller mandrels are in 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, and 2-1/2″ sizes. Likewise, pipe notching capacity for the JET abrasive pipe notcher is from 1/2″ to 2-1/2″ OD pipe.

The user can easily adjust the angle of the pipe being notched, from 30 to 90 degrees, without the need for tools. Even the different size mandrel rollers can be exchanged without tools. This allows for quick and toolless pipe notching flexibility. Pipes quickly lock into the housing, and a large lever arm allows the operator to move the pipe in for notching.

Grinding and Deburring

Operating from the opposite side of the notcher, the user can do typical grinding as well. The grinding end is the larger roller side, so there is more surface area. This allows for more universal grinding than just the pipes. When the grinding side is used, the direction of the JET abrasive pipe notcher needs to be changed. This is easy to do with the directional switch right by the grinder access area. The safety lockout switch is easy to see and operate, and it can easily be locked out of use.

Grinding with the JET Abrasive Notcher

Grinding with the JET Abrasive Notcher

In the middle of the dual station JET notcher is a large access area to the grinding belt. This can be used for deburring the notched pipe, or any other metal being worked. A hinged top cover provides full access to the top of the belt, hence giving the user the full 4-inch wide and 24-inch long flat sanding table.

Features Continued

Deburring Access

Deburring Access

Three replacement sanding/grinding belts in 36, 60 and 80 grit are included with the JET abrasive pipe notcher. Heavy gauge steel keeps the unit stable and durable. An included safety shield helps to protect the user during normal operation. Two 3-inch dust ports keep the sparks and debris away from the user.

An AC induction motor is rated and 3HP for single phase units and 4HP for 3-phase. JET’s abrasive pipe notcher is CSA/US certified. Finally, the dual station JET abrasive pipe notcher-1Ph (756180) and 3 Ph (756185) are covered by a 2-year warranty, as well as JET’s RED Assurance guarantee.

SUPPORT OUR ADVERTISERS

JET Abrasive Pipe Notcher FeatureJET Abrasive Pipe Notcher Specifications

  • Specifications: 756180; 756185
  • Model Number: DSAN4-1; DSAN4-3
  • Pipe Notching Capacity-OD (in.): ½ to 2 ½; ½ to 2 ½
  • Mandrel Sizes (in.): ½, ¾, 1, 1 ¼, 1½, 2, 2 ½
  • Belt Size (in.): 4 x 79
  • Working Height (in.): 40 ¾
  • Angle Degrees (o): 90 to 30
  • Speed (RPM): 3400
  • Motor (HP): 3 HP, 230V, Single Phase; 4 HP, 230/460V, 3-Phase
  • Optional Motor (HP):120V; 230V
  • Gross Weight (lbs.): 480

 

 

 

 

Readers Rating
0 votes
0

Leave a Reply

Be the First to Comment!

Notify of
avatar
wpDiscuz