Ryobi P360 Airstrike One+ 18 Gauge Stapler Handheld Tools

Ryobi P360 Airstrike One+ 18 Gauge Stapler Review

I was thrilled to receive the Ryobi 18 Volt One+ 18 Gauge Cordless Narrow Crown Stapler to review after having the chance to use its cousin, the 18 Gauge Cordless Brad Nailer, a few months back. Together, they have become my go-to tools for trim fastening. Having a wainscoting job to do gave me the perfect opportunity to put this member of the Airstrike family to the test.

One of the first things that I noticed about this tool was the weight. Coming in at 6.8 pounds with the battery installed, it was a little awkward at first. I quickly got past that though considering that there was no heavy, noisy air compressor to drag around or air hose to tangled up in. These cordless nailers and staplers make getting wood on the wall a true pleasure.


Ryobi P360 Airstrike Features

Ryobi Airstrike narrow crown angled rearThe Ryobi P360 Airstrike uses 18 gauge 1/4″ narrow crown staples ranging in length from 3/8″ to 1-1/2″. It can operate in two modes: contact actuation for working quickly or single sequential for precision applications. A simple switch is on the tool to choose between the two modes. The stapler includes Grip Light technology that engages the LED light by gripping the tool’s handle. The tool-free depth of drive adjustment and adjustable air pressure help to maintain proper conditions while protecting the surface of the material. One of the more useful features is the low staple indicator light. Sure, you can turn the tool and look in the magazine, but when you’re working quickly in contact actuation mode, it sure makes it easier to know when to reload. The magazine has a capacity of 105 staples and Ryobi claims that you can get up to 1000 staples driven in a single charge.

Thoughts on Wainscoting

On a recent job, I had the chance to install wainscoting in the foyer and stairwell with ace carpenter, Tom Gaige. This stapler was far superior to the pneumatic units I’ve used in the past. The job site was occupied, giving us the additional challenge of minimizing noise and avoiding tripping hazards that would normally accompany a compressor and hose setup. The Ryobi P360 Airstrike Crown Stapler allowed me to cover a gamut of applications with its range of 3/8″ to 1-1/2″ staples. I found it especially useful in installing the 1/4″ birch plywood that we used as a base for the wainscot. The Airstrike gave the surface tension necessary for installing it correctly. The Ryobi P360 Airstrike is also excellent for trim molding and anything that can benefit from greater holding power with minimal surface marring.

Ryobi Airstrike narrow crown trim

Ryobi P360 Airstrike One+ 18 Gauge Stapler Specifications

  • Battery: 18V
  • Type of Staples: 18ga 1/4” Narrow Crown
  • Magazine Capacity: 105 Staples
  • Staple Length: 3/8″ to 1-1/2″
  • Staples per Charge: 1,000
  • Fastener Collation: Glue StripTool
  • Weight: 5.0 lbs (6.8 pounds with battery as tested)
  • Warranty: 3 year limited
  • MSRP: $139
  • Includes: P360 Stapler, (500) 1″ narrow crown staplers, belt clip, and operator’s manual


Like all Ryobi tools, the P360 Airstrike One+ 18 Gauge Narrow Crown Stapler can be purchased exclusively at The Home Depot. For more information, please visit Ryobi’s website.

Pro Tool Reviews

Build Quality
Final Thoughts

With no air compressor to lug to the job site, air hose to trip over, or even gas cartridges to purchase, the Airstrike technology makes going cordless a no-brainer, even with a product that is a bit heavier. There are certainly more expensive cordless crown staplers out there, but based on my experience, I can highly recommend this tool for the weekend warrior or pro.

Overall Score 4.7 Pro Review
Readers Rating
2 votes

Buy it now at Home Depot

Buy It Online
Notify of
1 Comment
Newest Most Voted
Inline Feedbacks
View all comments
6 years ago

Bought one of these. Flat-out did not work; could not drive the fasteners home. (Yes, used a fully-charged battery.) Returned it to the store and declined a replacement. Very disappointed. I see it still is getting favorable reviews, so it’s possible I had bought a fluke, but I haven’t bothered to try one again.